Ihr Partner für Bronze seit 1929
BRONZE AND BEARINGS Your partner for bronze
SEARCH

Looser Aluminiumbronze 75

Looser Aluminium Bronze 75 (LAB 75) – CuAl10Ni5Fe4 DIN EN 12163/12167/12420

This wrought material is an aluminium multi-material bronze, which is available from stock in round, flat, square and hexagon full profile and as plates. Looser Aluminium Bronze 75 is a construction material with high strength properties, even at elevated temperatures; high permanent fatigue strength; good corrosion resistance against neutral and acidic, aqueous media as well as seawater; good resistance to scaling, erosion and cavitation.
The choice of alloys is made primarily according to the required strength properties. From this point of view, Looser Aluminiumbronze 78 and Looser Aluminium Bronze 79 have even higher values.
Hollow profiles from the same alloy group are primarily available from the continuous or centrifugal casting process in the form of tubes, cylinders or flange bushings under the trade name Looser Aluminiumbronze 75-1 and – with even higher mechanical properties – under Looser Aluminiumbronze 78-1.These two alloys are also available from stock in the form of round bars

 

Chemical composition (DIN EN 12163:2016-11)

 Element

Cu

AI

Ni

Fe

Mn

Zn

Si

Sn

Pb

Other

 Min. [%]

 - 8,5 4 3 - -

-

-

-

-

 Max. [%]

 Rest 11 6 5 1 0,4

0,2

0,1

0,05

0.2

 

Mechanic properties

Round bars
Flat bars
Hexagonal bars

 

Range I DIN EN 12163:2016-11
Ø 8 – 70 mm
-
SW 10 – 70 mm

Range II DIN EN 12163:2016-11
Ø 71 – 115 mm
-
-

Range III DIN EN 12420:2014-09
Ø 122 – 403 mm
-
-

Range IV DIN EN 12167:2016-11
-
Thickness 6 – 60 mm
-

Yield point Rp0,2

[N/mm2]

≥ 400

≥ 300

≥ 320

 

Tensile strength Rm

[N/mm2]

≥ 740

≥ 690

≥ 680

 

Brinell hardness

[HB]

-

≥ 195

 

 

Elongation at fracture A

[%]

≥ 8

≥ 10

≥ 10

 

Modulus of elasticity E

[kN/mm2]

~ 120

~ 120

~ 120

 

 

Physical properties (Guideline values)

Coefficient of thermal expansion

[10-6/K]

16

Electrical conductivity

[m/Wmm2]

7

Thermal conductivity

[W/mK]

51

Specific gravity

[kg/dm3]

7.6

 

Standards

DIN EN 12163/12167

CuNi2Si

ASTM

Alloy C 63000, C 63200

DIN 17665/17672

CuAl10Ni5Fe4

SAE

CA 630

VSM 10802

CuAl10Fe5Ni5

BS 2033

CA 104

 

Material designation

DIN EN 12163

  

DIN 17665

  

Abbreviated designation

Number

Abbreviated designation

Number

CuAl10Ni5Fe4

CW307G

CuAl10Ni5Fe4

2.0966

 

Forms of delivery

 

Range [mm]

Tolerance [mm]

Manufacturing method

Round bars

Ø 10 - 56

h11

drawn

Round bars

Ø 61 - 122

0 /+1

pressed

Round bars

 Ø 122 - 403

0 / +1

forged and pre-turned

Square and flat bars

10 - 200

0 / +3

pressed, rolled or forged

Hexagonal bars

10 - 70

h12

pressed or drawn

 

Example uses

  • Plain bearings with high threshold loads, highly stressed bearings in toggle presses, eccentric presses and forging machines.
  • Suitable for plain bearings in hot operations due to high hot hardness.
  • Guide bushings, pressure plates, sliding blocks, ball sockets, wear parts.
  • Worm and gear wheels with very high loads up to medium speeds are a significant application.
  • Pressure and spindle nuts, bolts, shafts, valve seat rings.
  • Used in hydraulics as valve bodies, pistons, piston rods, seats, cones and control parts.
  • Internal parts of high pressure fittings and hydraulic valves with the highest pressure levels, hot steam valves, fittings for high water velocities.
  • Capacitor bottoms, jaws for resistance welding machines.

Machinability

Looser Aluminium Bronze 75 can be machined like steel with the same strength. Machinability, based on CuZn39Pb3 (Ms58Pb) is approximately 20%. Looser Aluminiumbronze is very suitable for forging (temperature range 850-975°C); but not for cold forming.
The annealing temperature range lies between 650-850°C; stress relief heat treatment takes place at 300-400°C. The melting point is 1035-1054°C.
In addition, this material can be welded in the argon arc welding process using electrodes of the same material and direct current. Not suitable for soft or hard soldering or for autogenous welding.

Sliding partners

Mating steel surfaces should be hardened and finely machined. The finer the sliding surfaces, the higher the expected service life. Good lubrication is essential.

Looser Aluminiumbronze 75 - Availability

  • Over 150 sizes of tubular, round, flat, rectangular and hexagonal bars are available from stock or at short notice.
  • Forged rings, bushings and edge profiles onto the base sizes or contour pre-fabricated.
  • Sheets from 3-110 mm thickness and pre-cut parts are available at short notice.
  • Ready-to-install parts in accordance with customer drawing.

We will be more than pleased to advise you.

Subject to technical modifications; no responsibility is accepted for the accuracy of this information

 


 Links

Additional information can be found in this Looser Bronzes catalogue or under download

Material data sheet
Looser Aluminium Bronze 75
PDF

Open >